Vision VE-810 Professional Rotary Engraver by Vision Engraving Systems with a 8x10 inch engraving table area.

[ Vision VE-810 ] [ VE-810XD ] [ Phoenix 1212 ] [ Vision Cylindrical ] [ Vision 1612 ] [ Vision 1624 ] [ Vision 2424 ] [ Vision 2448 ] [ Router 2424 ] [ Router 2448 ] [ Vision Controller ] [ Vision Engraving Software ] [ Vision Pro Engraving Software ]

VISION'S NEW VE-810 ENGRAVING SYSTEM WAS DESIGNED FOR THE BEGINNER ENGRAVER...AS WELL AS THE EXPERIENCED ENGRAVER. What that means is that many of you may never have engraved before. Or maybe your experience with engraving is limited to manual engraving with a pantograph. Whatever the case, if your business needs to permanently mark small items on a regular basis, you need the VE-810. Despite what you may have heard, computerized engraving IS affordable and easy-to-learn! And Vision is in the business to make sure that continues. No other engraving system manufacturer packs as many features into their software, electronics and hardware while maintaining a friendly-to-use design. Within minutes you will be producing personalized gift items, name badges and signage. Whether your plans are to bring engraving services in-house or to enhance your existing business - no system can make it simpler.

Looking for the NEW VE-810XD? CLICK HERE

VE-810 SPECIFICATIONS
Power requirements:	110/220v 5amp service required
Physical footprint:	20.75"/527mm(d) x 19.0"/483(w) x 13.5"/343mm(h)
Weight:	55 lbs. (25 kg)
Shipping weight:	60 lbs. (27 kg) ships via UPS
Shipping dimensions:	24"/610mm(d) x 23"/584mm(w) x 17"/432mm(h)
Control panel:	User-friendly membrane switch w/international icons
Drive mechanism:	Leadscrew drive .5" pitch x & y axis, .25" pitch z-axis
Electronic drives:	Quiet drives in the x, y & z-axis
Software:	Full-featured Vision Engraving Software w/ 40 fonts and clipart package
PC requirements:	(Recommended) Pentium 166MHz; 16MB RAM; 1GB hard disk; SVGA monitor (Minimum) 486MHz with 50MB available hard disk; 8MB RAM; Windows™`95 or `98; CD-ROM drive; Serial Port
Z-axis clearance:	1"/25mm
Engraving area:	10"/254mm wide x 8"/203mm tall
Spindle Description:	Precision stainless steel 11/64" top loading w/depth setting micrometer
Spindle Speed:	5-14,000 rpm variable
Stepper motors:	Rated 2.0 amp
Table Type:	T-Slot Aluminum Extrusion on 1" centers
Mechanical attributes:	Steel frame construction, stainless steel Thompson linear rails, custom aluminum extrusions
Electrical attributes:	Integrated mechanical/electronics package in a single slide-in drawer for easy troubleshooting and maintenance.